Mustang Track Loader

Four Radial-Lift Track Loaders Plus an All-New Vertical Model

Mustang began in the 19th century as the Owatonna Mfg. Co. Starting as an agricultural implement manufacturer, Mustang has since grown into a 21st century compact equipment leader. Mustang built its first skid steer in 1965. Entering the track loader market in 2001, Mustang has a lot of experience in the dedicated track loader industry. Mustang track loaders are manufactured in Yankton, S.D.

Mustang offers four radial-lift track loader models and an all-new vertical-lift track loader to meet today’s market needs. The radial product line consists of the all-new 1650RT, 1750RT NXT3, 2100RT NXT3 and the 2500RT NXT3. Engines rated 69.9, 72 and 74.3 gross hp, respectively, are at the core of these Mustang track loaders. These engines, in concert with industry-leading horsepower management technology and planetary final drive, contribute to high tractive effort and fuel efficiency, says Mustang.

These four models feature radial-lift loader arm geometry, offering power in ground-engaging applications and additional reach at trailer loading height. A low-profile boom design enhances visibility, while providing a lift height of more than 127 in. Auxiliary hydraulic flow is standard (high flow optional), with connect-under-pressure couplers.

The all-new Mustang 3200VT unlocks a new market for Mustang track loaders, now created with a vertical-lift arm and an operating capacity of 3,200 lbs. Designed for ultimate comfort, the seat-mounted pilot joystick controls come standard with a new heavy-duty suspension seat and a full-color line-of-sight display. This new unit also features a Deutz 114-hp engine, 339 lbf of torque at 1,600 rpm, as well as a tilt breakout force of 9,901 lbf and a lift breakout force of 7,491 lbf.

Mustang track loaders offer many industry-leading features, including the patented IdealTrax automatic track-tensioning system. This system eliminates manual track tensioning and increases the life of the tracks, sprockets and bearings, due to the relief of track tension when the engine is shut off. This system saves the suggested 10- to 15-minute track tension checks that are recommended every 50 hours and the 30- to 45-minute tension readjustments required approximately every 300 to 400 hours, depending on usage. Mustang track loaders can also be ordered with the industry exclusive IdealAccess fold-up door, allowing the door to open and close during operation with no impact to the overall machine height.

Advice to Buyers

“Ensure that you are reviewing the physical machine performance beyond what the specification sheet states,” says Brian Rabe, senior product manager of skid and track loaders with Mustang. “The key is to first determine what you plan to do with the machine. What tasks do you need to accomplish? What terrain and space do you work in most often? What attachments do you already own, and what ones do you still need?”

P.O. Box 179, West Bend, WI 53090
262-334-9461 | |

Click on table to enlarge

Check out more 2017 track loader specs here.

No comments yet.


This site uses Akismet to reduce spam. Learn how your comment data is processed.