The A-1Q deep hole drill from Minnich Mfg. can be mounted on a compact excavator or skid steer loader to deliver powerful, efficient performance in quarrying, blasting, anchoring and tie-back applications. The 1,000-lb A-1Q-72 features a 110-in. mast height and 64-in. travel, while the 1,200-lb A-1Q-96 features a 140-in. mast height and 88-in. travel height. Both units feature rail leveling with a hydraulic cylinder that allows 90 degrees of rotation and up to a full 360-degree rotation when the cylinder is repositioned. Both units can be outfitted with an optional dust collection system.
Danuser is a manufacturer of diverse products from OEM parts to industrial and agricultural attachments, as well as recoil devices for shotguns and rifles. The company’s EP Heavy-Duty augers are some of its finest. These units have a lifetime warranty covering “output pull out.” These augers have an innovative planetary design with fewer internal components that are completely sealed and running in oil. Units range from 6 to 35 gpm with 1,014 to 3,697 ft-lbs of torque. New compact housing designs with hoses securely route out of the top, allowing you to dig deeper and in tighter locations. There’s also a three-year warranty on the drive unit.
Designed to work effectively on most excavators in the 8- to 15-ton range, the FX36 Defender is capable of clearing land in the most comfortable way possible: from the cab of your excavator. With its large cutter drum, four-sided knives and knife guides, this mulcher provides the most efficient cut possible, keeping pressures (and oil temps) down. Whether it’s invasive plant species or an 8-in. tree, the FX36 provides reliable, efficient mulching for a wide range of excavators. Like all BrushHound Attachments, it is durable, dependable and easy to maintain.
The hydraulic 6-in-1 Blade for Kubota’s KX040-4 compact excavator is loaded with performance enhancing features such as a load-sensing hydraulic system, speed balance, power balance and outstanding digging force. An adjustment of the thumb switch allows the 6-in-1 Blade to be angled to the right or left while the machine moves forward, eliminating the need for repetitive repositioning at right angles when backfilling trenches. Tilting requires a simple twist of the dozer grip. The blade’s capacity increases almost 0.75 cu yds over the standard blade and angles 25 degrees, improving backfilling time up to 35 percent.
Case added five new plate compactors to its attachments lineup — the SC-30, SC-60, SC-80, SC-110 and SC-220. The plate compactors are ideal for utility work and are primarily used to compact the foundation in shallower trenches and prevent movement/ground upheaval. These plates run on unidirectional hydraulics and are available in a variety of sizes. For soil compaction, the SC Series can compact up to 4 ft — more than five times the efficiency of handheld compactors. For slopes, the SC Series takes on the challenge of efficiently compacting materials on an incline. The new plate compactors can also drive and extract piles, fence posts, guardrails and more.
With the new Geith tilting quick coupler, operators can complete more work in less time from the comfort and safety of the cab. The tilting coupler offers up to 180 degrees of side-to-side rotation — depending on the model — providing greater productivity and versatility. With four independent locking components and a patented “curl-to-release” control system, the hydraulic quick coupler meets current and proposed safety standards (ISO/DIS 13031). The variable pin center design accommodates a variety of OEM attachments. The Geith tilting quick coupler is designed for use with excavators and backhoe loaders weighing between 6 and 26 tons.
Chicago Pneumatic RX6 Breaker
The Chicago Pneumatic RX6 light hydraulic breaker can be used in light demolition, landscaping, building renovation and road construction. The RX6 features a smart design with few components and only two moving parts, offering a high grade of availability and reliability. The RX recoil absorbing concept and polyurethane insulated breaker box system makes the breaker among the most silent on the market. Weighing 600 lbs, the RX6 is specified for carriers with a capacity of 9,300 to 19,800 lbs (carrier class 4.2- to 9-metric tons).
Terex TXH Series hydraulic hammers are built for complete compatibility with Terex compact excavators. Every hammer in the TXH Series is vibra-silenced, via the polymer suspension pad, to reduce total operator and carrier machine vibration exposure. The TXH hammers’ high-blow energy is constant throughout the engine rev range and has a low susceptibility to back pressure. The Terex range of hammers offer 251 ft-lbs (350 J) to 1,033 ft-lbs (1,400 J) of maximum energy per blow and 450 to 950 to 550 to 1,100 blows per minute (bpm).
The HDB Series hydraulic breakers from Hyundai Construction Equipment Americas Inc. are designed to work with Hyundai 9, 9A and HX Series hydraulic excavators. The Hyundai HDB Series includes 14 different models to fit multiple machine sizes and applications. Five models — the HDB 10, 20, 40, 50 and 90 breakers — are sized appropriately for Hyundai’s mini- and mid-sized excavators, ranging from .5- to 9-ton models. Hyundai breakers have a large chisel diameter, which increases the strength and durability of the chisel.